Stewart-audio CVA50-1 Manuel d'utilisateur télécharger pdf (Page 5)

8 9

2.2.3 Product Dimensions

2.3 Proper Cooling Considerations

Because CVA Series amplifiers regulates their temperature using con-

vection cooling and no fans, the amplifiers must be given adequate

space to allow for proper airflow. Do not stack the amplifiers on top of

each other or mount it in a way that other equipment will block airflow

along the surfaces of the case.

CAUTION: Inadequate airflow to the amplifier can cause the

amplifier to overheat and potentially become damaged in

the process. Be sure to provide plenty of air space to allow

for convection cooling.

2.4 Input Connections

Your CVA Series amplifier is provided with a 3-pin Euro Block connector

for its input connection. This connector will accept both balanced or

unbalanced connections, however some modifications must be made

for an unbalanced connection. See the next two sections for instruc-

tions on connecting your amplifier to its input source.

2.4.1 Balanced Input Connections

When using a balanced input source and connector, you must ensure

that the hot, cold, and ground pins of the connector are matched up to

the +, -, and ground pins of the CVA Series’ Euro Block connector re-

spectively. Diagrams have been provided for standard XLR and TRS

connectors. Please refer to the manual of your input source in case it

does not follow the standard pin-out.

NOTE: The CVA Series of amplifiers do not

accept TRS in-

puts wired for a stereo source. TRS inputs should only be

used for balanced mono inputs.

1 2 3 4 5 6 7 8 9 10 11 12

Pas de commentaire

Stewart-audio CVA50-1 Manuel d'utilisateur Page 5